スポンサーリンク

docomo dtab compact d-01J/Huawei M3化 完了

docomo dtab d-01JのHuawei M3化が完了しました...先日、公開したファイルを使用しています。
全てのファルのインストールは「twrp」のみでできます。肝心の「oeminfo」の拡張子が「.win」になっていますが、これはtwrpの拡張子になるのでtwrpのレストアからインストールして行きます(twrpのbackupフォルダーの中に入れておき、public.zip以外の3つのファルもバックアップに入れておきます)
update_data_full_public.zipはルート上に入れておきます。

後は説明ページ通りにしていきます...拡張子.imgもtwrpからインストール出来ます。ただ「d-01J」の動きが緩慢なので止まっている様に見えますがゆっくりと動いていますので焦りは禁物です。

以上...自己責任の世界ですよ。


コメント

  1. Fazzal より:

    Please elaborate complete process

    • neko より:

      First of all, it is necessary to have twrp introduced 7.0 as a prerequisite
      This is because unlock bootloader with fastboot oem unlock *** in unlocking code
      fastboot flash recovery recovery.img (recovery.img prepares twrp for m3 and renames its name)
      Also, use BOOT.img of d 01 j 7.0 so please make a backup
      The next one to prepare is oeminfo and its firmware of BTV-DL09C100
      There is no choice but to pick up the former from the net. (C100 means the EU version, if you get other oeminfo and rewrite it will worst case)
      The latter can be downloaded from the application called firmware finder
      Since it is in the play store, install it, and download firmware on the terminal side
      Please enter model name as BTV-DL09C100 in the application
      And download the latest B 310’s zip of the date
      At this time I think there are three files, but please select all and download
      On the mother ship we have installed Huawei Update Extractor
      Next, unpack the nonzipped zip file other than public.zip and obtain UPDATE.APP
      At HUE we can expand .APP file so we will expand the previous two
      Unzip BOOT.img, SYSTEM.img from one side and CUST.img from the other (Please select item extract as right click)
      Then, rewrite the four files (BOOT, SYSTEM, CUST, oeminfo) with the fastboot flash command
      Please rewrite from oeminfo at this time
      This is because the bootloader relocks when rewriting this
      Please unlock again with the above unlock command
      Please reboot and return to twrp and format data with wipe
      Please reboot bootloader again to have bootloder and rewrite the remaining three files
      Finally get it twrp again, flash from the install public.zip downloaded earlier please restart
      If you do restart this, it will operate as EU version m3
      However, since the behavior is a bit unstable, I will restore the backed up BOOT.img
      Since the backup file of twrp is saved as boot.emmc.win, restoration is done by putting it in the twrp file and selecting it from the restore item of twrp side
      This completes the m3 conversion
      I can not make a call as a bug
      Other than that, everything including the sensor is working properly

      It seems to work except that I can not use the phone. . .

      • J より:

        hey, thank you for the guide.
        Can you share your backed up BOOT.img, as my rebranded m3’s sensors are not working.
        thanks!

  2. Vita より:

    バックアップされたBOOT.imgを共有できますか?ありがとうございました!

    • neko より:

      android7 It is a boot loader for “docomo dtab d – 01j”. Other backups are also available, but perhaps the sensors such as screen rotation will revive. However, only if you are using M3_2 files distributed on this blog.

      android7这是“docomo dtab d – 01j”的启动加载程序。 其他备份也可用,但屏幕旋转等传感器可能会恢复。 但是,仅当您使用此博客上分发的M3_2文件时。

      https://drive.google.com/open?id=1XzFcEgNRoX0F-he_TxRNZj4KQnfMsuQm

  3. Fazzal より:

    flashing succesful, but after that, i can not install any 3rd party apk. security settings missing.. any solution?

  4. hiro より:

    6.0用のTWRPはあるんでしょうか?

  5. Thang Tran より:

    I was backup in TWRP before try to convert d-01j to M3 but it fail and now I cannot get back to d-01j rom by restore. It stuck on Android logo. Please help me or share the stock rom of d-01j for me. Thank you.

  6. hoz より:

    こちらの情報と共有されているファイル一式で、中古購入の白ロムd-01jを無事にm3化(C100B310)成功しました。お陰様でセンサー類も全て正常です。もともと、d-02hをm2化して使っていて、さすがに動作がもたついて来たので、乗り換えが上手くいって助かっています。
    ところで、B310->B311へアップデートを試みるべく、ttp://update.hicloud.com/TDS/data/files/p3/s15/G2005/g1719/v189827/f1/full/update.zip
    から、最新のupdate.zipをダウンロードし、Huawei Update ExtractorでBOOT, SYSTEM, CUSTの各imgを抽出しました。これをTWRPからダーティフラッシュで行けるでしょうか。もし試されていたら教えてください。

    • neko より:

      こんばんはhozさん。
      余りお勧めはできません...私自身、結果は芳しく無かった記憶があります。

      • hoz より:

        nekoさん
        ご提案ありがとうございます。
        わずかな期間のセキュリティーアップデートのために、不安定になるのも面倒なので、B310のまま使うことにします。
        M3化については、某掲示板だと賛否分かれるようですが、d-02HをM2化して長年使っていた自分には、M3化した方が圧倒的に使いやすいです。いろいろと情報提供、ありがとうございました。

  7. almahdi より:

    Hi I have a device already on global rom c100b009 and all sensor working but I want to upgrade to android 7 first I took backup in TWRP then follow this method but with no success then I tried to flash b310 directly it works but sensor not working tried your boot backup with no success also tried to go back to b009 and restore the backup I made also sensor not working, any idea what to do? also, I can’t find original firmware for d-01j I think it will fix the sensor but I can’t find it anywhere do u have it ??

  8. nanasi より:

    Partitions Backup & Restoreなどでvendor.imgを抽出することって出来ますか…?
    Lineage化後に戻そうと思ったのですがvendorのバックアップを忘れてしまいまして…

    • neko より:

      こんばんは。
      私の所にも無いですね、vendor.imgを探されるのでしたら5ch辺りで気長に探して見てください。

      • NANASI より:

        返信していただきありがとうございます!
        1日掛けて探していたのですが、差分ファイルしか見つからずに詰まっています…
        もしroot化しているなら上記のアプリでvendor.imgを抽出していただけると非常に有り難いです…!
        もしお時間があればお願いしますm(_ _)m

タイトルとURLをコピーしました